Useful A/V Adaptors

With a depth of only 33mm, the DADO-OEM is a low profile version of the FBA-1 for use with Dado trunking and UK standard 35mm wall boxes. Independent grounds are maintained for the three video channels and the syncs to ensure that the adapter does not degrade the signal.

• It is designed for miniature RGBHV cable only.

For use with pre-made VGA cables, this adapter has both a front panel HD15 for VGA and internal 90 deg HD15.

• Required depth = 35mm

HD15 for VGA terminated onto screw terminals. All active pins are available with both pin numbers and RGBHV connections highlighted.

• Required depth = 35mm

HD15 for VGA with a 3.5mm stereo jack for audio, both terminated in screw terminals. All active pins are available with both pin numbers and RGBHV connections highlighted.

• All grounds are kept independent
• Required depth = 35mm

Front and rear panel HDMI sockets. For use with pre-made HDMI cables.

• Required depth = 20mm plus connector

Front panel HDMI socket linked to a 90deg HDMI socket internally.

• For use with pre-made HDMI cables.
• Required depth = 20mm

Front panel HDMI socket terminated internally onto screw terminals allowing the shortening of HDMI cable to minimise losses.

• A lacing bar is incorporated for securing of the cable behind the socket.
• Supplied with full connection instructions & typical cable colour codes.
• Required depth = 30mm

USB type A socket for panel mounting and internal screw terminations.

• 2 x M3 mounting pillars with fixing screws are provided.
• Required depth = 20mm

8 pin RJ45 socket for panel mounting and internal screw terminations.

• Required depth = 28mm

HD15 M-F connector at right angles to allow the lid to be closed when a VGA cable is plugged in. These handy adapters are also ideal where depth is an issue in cabinets, behind screens and other hard to get locations.

9pin D M-F variation for RS232 (serial) connections.

• Complete with Mounting Kit

• Complete with Mounting Kit

• Complete with Mounting Kit