Audio/Video Switchers

The VP-211DS is a high performance automatic switcher for computer graphics video signals ranging from VGA through UXGA resolution with unbalanced stereo audio. The VP-211DS is ideal for presentation systems utilising wall plate inputs or requiring automatic signal switching.

Features

• Contact Closure Remote Control Capability.
• Passive Loop Through Output.
• Input Signal Termination.
• ID Bit Control.
• Compact Size – Part of the Kramer TOOLS™ family, compact, high quality and cost effective solutions.

The PT201VGA is a high performance switcher for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It switches either of two signals to a single output.

Features

• High Bandwidth - 1200MHz (-3dB).
• HDTV Compatible.
• Mechanical (Passive) Switching - No power required.
• Ultra-compact - Part of the Kramer PicoTOOLS™ family of extreme compact, high quality and cost effective solutions.

The VS-41AV is a high performance switcher for composite video and unbalanced stereo audio signals. It switches any one of four signals to a single output.

Features

• High Bandwidth - 520MHz (-3dB).
• Mechanical (Passive) Switching - No power required.
• Desktop Size - Compact size. Two units can be rack mounted side-by-side in a 1U rack space with the optional RK-81 adapter.

The 4x1V is a high performance switcher for composite video signals. It switches any one of four signals to a single output.

Features

• High Bandwidth - 400MHz (-3dB).
• Video on RCA Connectors - 4 x 1VB has BNCs.
• Mechanical (Passive) Switching - No power required.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

The WP-211DS is a 2-input automatice Switcher for XGA and stereo Audio signals. It switches to the secondary input upon loss of the primary input or it can be switched via contact closure. Dual video outputs are in RGBHV and Twisted Pair CAT 5 formats on terminal block connectors.

The VS-21H-IR is a high-performance switcher for HDMI signals. It reclocks, equalizes and switches either of two inputs to a single HDMI output.

• Max. Data Rate - 2.25Gbps.
• HDTV Compatible.
• HDCP & HDMI Compliant.
• Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal to travel longer distances.
• EDID PassThru - Passes EDID/HDCP signals from source to display.
• HDMI Support - HDMI (V.1.4 with Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC).
• Active Input & Output LED Indictors.
• Control - Front panel or IR remote controller (included).
• Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.

This product replaces the VS-21H (previously VS-21HDMI)

Specification

The VideoEase HDMI 3x1 Switcher Kit allows up to three (3) different HDMI sources to be connected to one (1) HDMI display via two (2) Cat5e unshielded twisted pair cables in a pointto- point configuration. The kit includes one transmitter and one receiver and supports up to 100 ft (30m) at 1080p via Cat5E/6 cable.

Applications

Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, medical information systems.

Features

• Up to 100 ft (30m) @ 1080p via two (2) Cat5E/6*
• Push button switch control
• HDMI 1.3 (except for 1080p Deep Color)

* Supports Deep Color up to 1080i

Specification

Route and distribute audio/video up to 600 feet using CAT5 cable instead of bulky coax cables.

The VEEMUX® Audio/Video Matrix Switch routes audio and video inputs from many video sources to multiple displays (projectors, monitors, etc.) and speakers via inexpensive Cat5/5e/6 UTP cable. It is capable of connecting to as many as 32 video sources via transmitters and 16 video displays via receivers with a maximum extension of 600 feet between the local and remote units.

A single audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connected to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system.

Features

• Configure and control the switch through Ethernet, serial port or front panel buttons.
• Matrix Control Software with Graphical User Interface is included.
• Supports resolutions up to 1920x1440.
• Inputs and outputs can be named.
• Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface.
• Equipped with Liquid Crystal Display (LCD) for front panel operation.
• A digital VU-meter shows the audio levels of the selected output.
• Each output provides one video signal and one stereo audio signal.
• Each input can be independently connected to any or all outputs with no image degradation.
• No loss of audio or video quality between the local and remote units.
• 1RU or 2RU rackmount case is standard.
• VGA, S-Video and HDTV transmitters and receivers can be supported on the same VEEMUX unit.
• VGA inputs only work with VGA outputs, S-Video inputs only work with S-Video outputs, and HDTV component video inputs only work with HDTV component video outputs.

Specification

Switch 1 monitor between multiple workstations

The VIDMUX® BNC Video-Only Switch allows you to share one monitor among multiple Workstations.

Features

• Eliminate redundant monitors
• Available with RS232 control option.

Specification