your basket

items ( )

go to checkout

Accessories for Muxlab Baluns Products

IR Emitter
Muxlab LogoThe IR Emitter (500998) works in conjunction with MuxLab products to support IR source control between the AV source and the AV display. The 500998 connects to an active balun transmitter.

Features

  • Supports the following IR data formats: NEC code, RC5 code, RC6 code, Grunding code, RCA code, Zenith code and Sony 12-bit code
  • 3.5mm (mono) plug
  • Carrier frequency: 38 kHz

Specification

Download Data Sheet

IR Emitter

M500998

£11.00

add  to basketadd to basket
IR Sensor
Muxlab LogoThe IR Sensor (500999) works in conjunction with MuxLab products to support IR source control between the AV source and the AV display. The 500999 connects to an active balun receiver.

Features

  • Supports the following IR data formats: NEC code, RC5 code, RC6 code, Grunding code, RCA code, Zenith code and Sony 12-bit code
  • 3.5mm (stereo) plug
  • Carrier frequency: 38 kHz

Specification

Download Data Sheet

IR Sensor

M500999

£18.50

add  to basketadd to basket
VideoEase Rackmount Balun Chassis
Muxlab LogoThe Rackmount Balun Chassis 16 is designed as a head-end cable management solution to allow any combination of MuxLab square baluns to be installed in a 19” relay rack. Head-end AV equipment such as DVD players, video servers and sat boxes may be installed in a local wiring closet and connected to the Cat5 structured cabling system via a wide array of MuxLab balun solutions. The panel is custom-tailored to allow any combination of up to sixteen MuxLab baluns to be installed. The baluns may be installed with the RJ45 either front or rear facing depending on where the Cat5 cabling will enter or exit the system. At the display end, the appropriate MuxLab baluns are installed at the display to support a fully Cat5 cabling solution. Each balun snaps into place and is held firmly by a spring latching mechanism. The one-piece design makes the product easy to install and maintain. There are no parts to lose or replace.

Features

  • Space efficient - 2U height
  • One-piece design
  • Latching mechanism for secure installation
  • Supports up to sixteen baluns
  • Snap-in design for ease of installation
  • Baluns install forward or rear-facing
  • Includes four rackmount screws and washers
  • Slot number silkscreen on front

Specification

Download Data Sheet

VideoEase Rackmount Balun Chassis

M500900

16 Port

£160.50

add  to basketadd to basket
 

M500902

6 Port

£142.99

add  to basketadd to basket
VideoEase Rackmount Balun Chassis Filler Modules
Muxlab Logo

Specification

Download Data Sheet

VideoEase Rackmount Balun Chassis Filler Modules

M500901

4 Pack

£11.99

add  to basketadd to basket
Wall Mount Balun Fixture
Muxlab LogoThe Wall Munt Balun Fixture (500910) allows any MuxLab square balun to be installed behind a Decora® compatible wall plate for custom AV installation. The baluns may be installed with the RJ45 either front or rear facing depending on where the Cat5e/6 cabling will enter or exit the system. At the head end, the appropriate MuxLab baluns are installed near the equipment to support a fully Cat5e/6 cabling solution. Each balun snaps into place and is held firmly by a spring latching mechanism. The one-piece design makes the product easy to install and maintain. There are no parts to lose or replace.

Features

  • Supports one (1) MuxLab square balun
  • Decora® compatible
  • One-piece design
  • Snap-off mounting tabs for mounting versatility
  • Attaches to standard gang boxes and mud rings

Specification

Download Data Sheet

Wall Mount Balun Fixture

M500910

£22.50

add  to basketadd to basket
Surface Mount Balun Fixture
Muxlab Logo

The Surface Mount Balun Plate (500915) allows any MuxLab square balun to be installed on a wall or furniture surface for a more permanent and secure installation. Head-end AV equipment such as DVD players, video servers and sat boxes may be installed in a local wiring closet and connected to the Cat5 structured cabling system via a wide array of MuxLab balun solutions.

The 500915 fully covers the balun and allows the pin configuration to be displayed for ease of reference. Mounting ears are positioned to allow multiple fixtures to be installed next to each other. The 500915 comes with two (2) mounting screws and plastic anchors for drywall (gyproc) installation.

Features

  • One-piece design
  • May be mounted close to each other
  • Includes two (2) mounting screws and anchors
  • Balun sold separately

Specification

Download Data Sheet

Surface Mount Balun Fixture

M500915

£19.95

add  to basketadd to basket