Audio & Video Baluns for A/V over Cat5

• Composite video and stereo audio via twisted pair
• Presentation systems, custom home installations.

Specification

• Composite or S-Video and stereo audio via twisted pair
• Audio-video systems
• Custom home installations.

Specification

• Line-level audio via twisted pair
• One pair required per audio channel
• Custom home installations.

Specification

• Dolby Digital or dts digital audio via twisted pair up to 600 ft.
• Custom home installations.

Specification

• Allows a standard AES Analog or Digital Audio channel to be connected via Cat 5
• With heavy-duty strain relief.

Specification

• Allows a standard AES Analogue or Digital Audio channel to be connected via Cat5
• With heavy-duty strain relief

Specification

• Supports stereo audio over Cat5
• 60Hz to 20KhZ bandwidth
• RCA to RJ45.

Specification

• Supports hi-fidelity stereo audio over Cat5
• 20Hz to 20kHz bandwidth
• RCA to RJ45.

Specification

• Cost-efficient cabling
• Up to 5,000 ft (1.5km) via Cat5e/6/6 UTP
• Built-in 3.5mm stereo plug lead
• Fewer points of failure
• Compact design

Specification

• Combines 4 composite video channels over one Cat5 cable
• Features 4 RCA connectors and 1 RJ45

Specification

• Combines 4 analog audio channels over one Cat5 cable
• Features 4 RCA connectors and 1 RJ45.

Specification

• Up to 670m via Cat5
• 20Hz to 20kHz audio bandwidth
• Built in colour coded cable leads
• Compact design for more efficient wiring

Specification

The VideoEase Stereo AV/IR Pass-Thru Balun (500048, 500049) allows one (1) composite video, one (1) stereo audio and one (1) IR emitter signal to be transmitted via a single Cat5e/6 cable in a point-to-point connection. The Stereo AV/IR Pass-Thru Balun features full audio bandwidth response for high fidelity applications and features built-in colour-coded cable leads for ease of installation.

The Stereo AV/IR Pass-Thru Balun also works in conjunction with third party IR Remote Control equipment allowing the IR Emitter to connect to the IR control module using the same Cat5e/6 cable as video and audio for more cost-efficient cabling. Some of the applications are; classroom video distribution, commercial and home audio/video systems, hospital video training, video conferencing, and video kiosks.

• Video up to 2,200 ft (670m) via Cat5e/6
• Audio up to 3,250 ft (990m) via Cat5e/6
• 20 Hz to 20 kHz audio bandwidth
• IR 2-wire emitter pass-thru on fourth twisted pair
• Built-in colour-coded cable leads
• Lifetime warranty

Specification

The Stereo AV/IR Pass-Thru Balun (500049-WP-UK) allows one (1) composite video, one (1) stereo audio and one (1) IR emitter signal to be transmitted via a single Cat5e/6 cable in a point-to-point connection. The Stereo AV/IR Pass-Thru Wall Balun features full audio bandwidth response for high fidelity applications and is compatible with 86x86mm back boxes The Stereo AV/IR Pass-Thru Balun works in pairs or in conjunction with the 500048 or 500049. Some of the applications are: classroom video distribution, commercial and home audio/video systems, hospital video training, video conferencing and video kiosks.

Features

• Video up to 2,200 feet (670m) via Cat5e/6
• Audio up to 3,250 feet (990m) via Cat5e/6
• 20 Hz to 20 kHz audio bandwidth
• IR 2-wire emitter pass-thru on fourth twisted pair
• Built-in colour-coded cable leads
• Compatible with 86x86mm back boxes
• Compatible with 50x50mm faceplate opening

Specification

• Composite and S-Video distribution via twisted pair
• Up to two video and two audio to eight locations
• Presentation, classroom, corporate projection systems
• Custom home installations

Specification

This Transceiver box allows transmission of 3-4 sets real time colour or monochrome Video signal up to 680 meters over Cat.5e UTOP cable. This Transceiver box is designed for small CCTV installations where size and space are restricted.

Specification

The Stereo-Audio/Video balun lets you rely upon twisted pair cabling for a variety of audio and video needs, eliminating the need for expensive coaxial cable for industrial and consumer products. This money saving convenience is possible thanks to the essential design of the Stereo-Audio/Video, which enables three unshielded twisted pairs to transmit one composite analog video signal and two base band analog audio signals.

Specification

This RCA audio balun is ideal for corporate A/V, schools, home theatre and most of any other situation involving structured audio distribution and transmits dual mono or single stereo audio signals via Cat.5e UTP cable. This balun provides a low cost and versatile cabling solution for any audio distribution.

Specification

This RCA audio balun is ideal for corporate A/V, schools, home theatre and most of any other situation involving structured audio distribution and transmits dual mono or single stereo audio signals via Cat.5e UTP cable. This balun provides a low cost and versatile cabling solution for any audio distribution.

Specification

These adapters are ideal for Audio/Video applications for offices, schools, home theatre, and most of other applications involving structured A/V distribution signals via Cat.5e UTP cable.

Features

• Simplicity of design
• Suitable for all audio, video services and data
• Compliant with residential and commercial cabling standards
• Plastic housing with snap on cover
• Low cost and versatile cabling solution

Specification

The Kramer PT110 is an XGA line transmitter that receives an XGA signal and transmits it over a CAT5 cable to the TP-120 receiver. The PT110 has over 150MHz video bandwidth, allowing a transmission range of 300 ft. (> 100 metres). It can use the simplest UTP CAT 5 cables, and performs even better with higher quality cables. The PT110 is housed in a Kramer Pico TOOLS enclosure, and is 12VDC fed.

The PT-120 is an XGA line receiver that is designed to be used with an XGA line transmitter, thus utilising existing UTP cabling that results in an efficient, fast and uncluttered environment. The PT-120 receives a coded CAT5 signal transmitted by either the WP-110 or the PT-110, decodes it and converts it to an XGA output. Using standard CAT5 cable, the PT-120 (together with the WP-110 or the PT-110) has an operating range of more than 300 ft. (more than 100 metres). The PT-120 includes EQ and level controls, is housed in a Kramer Pico TOOLS enclosure, and is 12VDC fed.

The TP-121 and TP-122 are a twisted pair transmitter and receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121 transmitter converts computer graphics video and unbalanced stereo audio inputs into a twisted pair signal and the TP-122 converts the twisted pair signal back into a computer graphics video, unbalanced stereo and S/PDIF audio outputs.

Features

• Bandwidth - 350MHz (-3dB).
• Twisted Pair Connectors - RJ-45 connectors.
• HDTV Compatible.
• Level (Gain) and EQ (Peaking) Controls (TP-122).
• System Range - Up to 100 metres (320’).
• Cable - UTP (unshielded twisted pair) such as CAT 5.
• Power Connect System - Can send 12V DC on the CAT 5 cable to power the receiver or can receive 12V DC from the receiver on the CAT 5 cable. All system units must have Power Connect to use this feature.
• Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.

The 711N and 712N are a twisted pair transmitter and receiver for composite video and unbalanced stereo audio signals. The 711N transmitter converts composite video and stereo audio to a twisted pair signal and the 712N receiver converts the twisted pair signal back into composite video and stereo audio signals.

Applications

• Remote monitoring for CCTV, medical, school and broadcasting applications
• Existing facilities with TP cable already installed
• Teleconferencing in offices and hospitals using existing intercom or telephone wiring