Baluns for CCTV over Cat5

Show only parts from :

VideoEase CCTV Modular Balun
Muxlab Logo

The VideoEase CCTV Balun allows a single CCTV video signal to be transmitted via cost-effective unshielded twisted pair (UTP) cable.

  • Composite video via twisted pair
  • BNC to RJ45
  • Security and Surveillance

Specification

VideoEase CCTV Modular Balun

M500000

£15.95

add  to basket add to basket
VideoEase PTZ Balun
Muxlab Logo
  • Pan,Tilt, Zoom Balun for "up-the-coax" CCTV systems
  • Security and surveillance.

Specification

VideoEase PTZ Balun

M500007

£24.99

add  to basket add to basket
VideoEase CCTV Screw Terminal Balun
Muxlab Logo
  • Composite video via twisted pair
  • BNC to screw terminals
  • Fits side-by-side on DVRs and muxes
  • Security and Surveillance

Specification

VideoEase CCTV Screw Terminal Balun

M500009

£13.99

add  to basket add to basket
VideoEase LongReach™
Muxlab Logo
  • Composite video to twisted pair up to 1700m
  • Requires floating 24VAC (not supplied)
  • Security and Surveillance
  • Auto-gain control - No need for manual adjustment

Also available, LONGREACH™ active 16 port hub - call our sales office

Specification

VideoEase LongReach™

M500015

£142.50

add  to basket add to basket
VideoEase CCTV Pass-Thru Balun
Muxlab Logo

Combines CCTV video, remote power and PTZ control over one 4-pair Cat5 cable with RJ45 terminal.

Specification

VideoEase CCTV Pass-Thru Balun

M500022

£18.95

add  to basket add to basket
VideoEase CCTV Mini Balun
Muxlab Logo
  • Converts CCTV video to twisted pair
  • Fits inside CCTV dome cameras and CCTV camera back boxes.

Specification

VideoEase CCTV Mini Balun

M500023

£17.50

add  to basket add to basket
VideoEase CCTV Power-Thru Balun
Muxlab Logo

Combines CCTV video and remote power over one 4-pair Cat5 cable with RJ45 terminal.

Specification

VideoEase CCTV Power-Thru Balun

M500024

£18.95

add  to basket add to basket
VideoEase BNC Quad Video Balun
Muxlab Logo
  • Combines 4 composite video channels over one Cat5 cable
  • Allows up to 4 CCTV cameras to be connected via 1 Cat5 cable
  • Features four BNC connectors and 1 RJ45.

Specification

VideoEase BNC Quad Video Balun

M500037

£37.95

add  to basket add to basket
VideoEase Active CCTV Transmitter Balun
Muxlab Logo
  • Low power consumption - less than 0.7W
  • Derives power from camera power supply
  • Gain compensation based on cable length
  • Suitable for 12V DC cameras (For 24VAC cameras use M500101 - call sales)
  • Ground loop isolation
  • Fits inside CCTV dome cameras and back boxes
  • Works with other Muxlab CCTV baluns
  • Cable strain relief

Specification

VideoEase Active CCTV Transmitter Balun

M500100

£54.95

add  to basket add to basket
Passive CCTV Hub
Muxlab Logo
  • Allows up to 16 cameras to be connected via Cat5
  • Allows video, power and PTZ control to be managed via one Cat5 cable
  • Works in conjunction with MuxLab p/ns 500009, 500022, 500023, 500024, 500029 for a complete CCTV cabling solution
  • Features built-in balun on video portion.

Specification

Passive CCTV Hub

M500130

UTP/Coax

£249.50

add  to basket add to basket

M500131

UTP/UTP

please call

 
Unshielded 8P2C Jack to BNC Male Baluns
Economy Logo

Unshielded 8P2C Jack to BNC Male for outdoor use

Important: Normally, the wiring uses 4/+, 5/- or 7/-, 8/+. Please contact us if you require different wiring (such as 4/-, 5/+ or 7/+, 8/-).

Specification

Cable
  UTP COAXIAL
Impedance: 100 Ohm at 1MHz 75 Ohm at 1MHz (RG59/U)
Max. Capacitance: 20pf/ft 25pf/ft of coax allowed per end–to-end link
Attenuation: 6.6dB/1000ft at 1MHz  
MAX. DISTANCE: COLOUR 2,230ft (680M) via Cat.5e
MONOCHROME 2,550ft (780M) via Cat.5e
TEMPERATURE: OPERATING 0°C ~ 55°C
STORAGE -22°C ~ 85°C
HUMIDITY: ≤ 95%
Electrical
Bandwidth: 5MHz ~ 8MHz
Maximum Input: 1.1Vp-p
Impedance: 75 Ohm to 100 Ohm (or 75 Ohm to 120 Ohm on request)
Insertion loss: ≤2dB per pair over the frequency range from DC to 8MHz
Return loss: ≥40dB at 8MHz
Unshielded 8P2C Jack to BNC Male Baluns

BAL-MB8O

£7.75 £5.55

add  to basket add to basket
Unshielded RJ45 Jack to BNC Male Baluns
Economy LogoUnshielded RJ45 Jack to BNC Male Baluns

BAL-MB8I

£7.90

add  to basket add to basket
Unshielded RJ45 Jack to 1 x BNC Male Cord Baluns
Economy Logo

Unshielded RJ45 Jack to BNC Male Wiring: 4+ 5-

Specification

Cable
  UTP COAXIAL
Type: 24 AWG or lower solid copper twisted pair wire RG59/U
Impedance: 100 Ohm at 1MHz 75 Ohm at 1MHz
Max. Capacitance: 20pf/ft 25pf/ft of coax allowed per end–to-end link
Attenuation: 6.6dB/1000ft at 1MHz  
MAX. DISTANCE: COLOUR 2,230ft (680M) via Cat.5e
MONOCHROME 2,550ft (780M) via Cat.5e
TEMPERATURE: OPERATING 0°C ~ 55°C
STORAGE -22°C ~ 85°C
HUMIDITY: up to 95%
Electrical
Bandwidth: Video DC to 8MHz
Maximum Input: 1.1Vp-p
Impedance: 75 Ohm to 100 Ohm (or 75 Ohm to 120 Ohm on request)
Insertion loss: ≤2dB per pair over the frequency range from DC to 8MHz
Return loss: ≥15dB over the frequency range from DC to 8MHz
Common mode rejection: ≥40dB at 8MHz
Unshielded RJ45 Jack to 1 x BNC Male Cord Baluns

BAL-MB8-C

£12.35 £9.75

add  to basket add to basket
Unshielded RJ45 Jack to BNC Male + DC Power Plug Cord Baluns
Economy Logo

Unshielded RJ45 Jack to BNC Male and DC Power Plug Wiring: 1~6

Unshielded RJ45 Jack to BNC Male + DC Power Plug Cord Baluns

BALMBD80-C

£12.95

add  to basket add to basket
Unshielded RJ45 Jack to BNC Male + DC Power Socket Cord Baluns
Economy Logo

Unshielded RJ45 Jack to BNC Male and DC Power Socket Wiring: 1~6

Unshielded RJ45 Jack to BNC Male + DC Power Socket Cord Baluns

BALMBD80C1

£12.95

add  to basket add to basket
Shielded RJ45 Jack to 4 x BNC Female Transceiver Box
Economy Logo

This Transceiver box allows transmission of 3-4 sets real time colour or monochrome Video signal up to 680 meters over Cat.5e UTOP cable. This Transceiver box is designed for small CCTV installations where size and space are restricted.

Specification

Bandwidth: Video DC ~ 8MHz
Insertion loss: ≤2dB over the frequency range from DC to 8MHz
Return loss: ≥15dB over the frequency range from DC to 8MHz
Common mode rejection: ≥40dB at 8MHz
Impedance: 75 Ohm
Transmission distance: 2,200ft (Cat.5e UTP)
UTP Cable: 24-AWG or lower solid copper twisted pair wire
Impedance: 100 Ohm at 1MHz
Max. capacitance: 20pf/ft
Attenuation: 6.6dB/1000ft at 1MHz
Dimension: 81 x 60 x 24mm
Shielded RJ45 Jack to 4 x BNC Female Transceiver Box

BAL-4FB8S

£19.10

add  to basket add to basket
Shielded RJ45 Jack to 2 x RCA + 1 x BNC Female Transceiver Box
Economy Logo

The Stereo-Audio/Video balun lets you rely upon twisted pair cabling for a variety of audio and video needs, eliminating the need for expensive coaxial cable for industrial and consumer products. This money saving convenience is possible thanks to the essential design of the Stereo-Audio/Video, which enables three unshielded twisted pairs to transmit one composite analog video signal and two base band analog audio signals.

Specification

Bandwidth: Video DC ~ 8MHz, Audio 20MHz ~ 50MHz
Insertion loss: ≤2dB over the frequency range from DC to 8MHz
Return loss: ≥15dB over the frequency range from DC to 8MHz
Common mode rejection: ≥40dB at 8MHz
Impedance: BNC (video) 75 Ohm, RCA (audio) 600 Ohm
Transmission distance: 2,200ft (Cat.5e UTP)
UTP Cable: 24-AWG or lower solid copper twisted pair wire
Max. capacitance: 20pf/ft
Attenuation: 6.6dB/1000ft at 1MHz
Dimension: 81 x 60 x 24mm
Shielded RJ45 Jack to 2 x RCA + 1 x BNC Female Transceiver Box

BAL-3FRB8S

£15.95

add  to basket add to basket