HDMI Extenders (Baluns)

The VideoEase HDMI Econo Extender Kit (500401) allows HDMI equipment to be connected up to 200 ft (60m) via two (2) Cat5e/6 unshielded twisted pair cables in a point-to-point configuration at 1080i resolution. The product also supports 1080p up to 100 ft (30m) via two (2) Cat6 cables. The kit comes with one (1) transmitter, one (1) receiver and one (1) power supply.

Applications

Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, medical information systems.

Features

• 100 ft (30m) @ 1080p via Cat6*
• Up to 200 ft (60m) @ 1080i via Cat5e
• Connect via two (2) Cat5e cables
• HDMI 1.3 (except for 1080p Deep Colour)

* Supports Deep Colour up to 1080i

Specification

The HDMI IR/Extender Kit (500405) allows HDMI equipment to be connected up to 300ft (91m) via two (2) Cat5e/6 unshielded twisted pair cables in a point-to-point configuration at 1080i resolution. The product also supports 1080p Deep Color up to 150ft (46m) via two (2) Cat6 cables. The kit includes one (1) transmitter, one (1) receiver, one (1) IR Emitter, one (1) IR Sensor and two (2) power supplies.

Features

• Supports HDMI 1.3a
• Up to 150ft (46m) @ 1080p Deep Color via Cat6
• Up to 300ft (91m) @ 1080i via Cat5e/6
• Connect via two (2) Cat5e/6 cables
• Includes IR Emitter and IR Sensor

Specification

The HDMI 1x4 Distribution Hub (500420) allows one (1) HDMI source to be distributed to up to four (4) HDMI displays via two (2) Cat5e/6 cables. The product supports up to 150 ft (46m) at 1080p/8-bit via Cat5e cable on either side of the hub. The product supports remote IR control and works in conjunction with the HDMI IR/Extender (500405 [kit], 500406 [Tx] and 500407 [Rx]).

Applications

Commercial and residential AV systems, classroom training systems, digital signage, boardroom systems, medical video systems.

Features

• Distributes one HDMI source to up to 4 displays
• Supports Cat5e/6 on input and output sides
• Up to 150 ft (46m) @ 1080p via two (2) Cat5e
• Up to 300 ft (91 m) @ 1080i via two (2) Cat5e
• Up to 150 ft (46m) @ 1080p Deep Color via Cat6
• Cascadable • Local HDMI output
• Includes one (1) IR Emitter for IR source control
• EDID configuration switch

Specification

The VideoEase HDMI 3x1 Switcher Kit allows up to three (3) different HDMI sources to be connected to one (1) HDMI display via two (2) Cat5e unshielded twisted pair cables in a pointto- point configuration. The kit includes one transmitter and one receiver and supports up to 100 ft (30m) at 1080p via Cat5E/6 cable.

Applications

Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, medical information systems.

Features

• Up to 100 ft (30m) @ 1080p via two (2) Cat5E/6*
• Push button switch control
• HDMI 1.3 (except for 1080p Deep Color)

* Supports Deep Color up to 1080i

Specification

The HDMI Mono Extender Kit (500450) allows HDMI equipment to be connected up to 330 ft (100 m) @ 1080p Deep Color via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter (500998) and IR Sensor (500999) for remote control applications.

Features

• HDMI 1.3a
• Up to 330 ft (100m) at all resolutions up to 1080p Deep Color via single Cat5e/6
• Supports IR remote source control
• Includes IR Emitter (500998) and IR Sensor (500999)

Specification

The CatX HDMI Tx units broadcast a sharp, high quality video and audio signal up to 90m using low cost Cat6 cabling. Cat5 cable will give good results at distances up to 40m. The CatX HDMI Transmitter units can connect to any HDMI source using any good quality HDMI cable up to 20m from the transmitter.

The CatX HDMI transmitter unit connects to any single cat5 CatX HDMI Receiver or CatX HDMI Repeater using low cost UTP networking cable. Designed for commercial environments (24/7 reliability), CatX HDMI Tx will broadcast HD digital video and audio over cat6 UTP cable at 720p/1080i up to 65m or at 1080p up to 50m. This CatX HDMI transmitter unit also incorporates an EDID facility and is HDCP compliant for use with Blu-Ray and Satellite video sources.

This CatX HDMI transmitter requires no manual setup. Distance adjustment and skew correction are automatic when the unit is powered up. This makes installation an easy and straight forward process.
A Rack mount unit is also available for use with this product. Each 1U Rack mount unit can hold up to 4 x HDMI Tx's

More Details

CatX HDMI receiver units will output a sharp high quality video and audio signal up to 90m depending on the resolution. The CatX HDMI receiver unit can connect to any HDMI display device using good quality HDMI cable up to 20m from the receiver.

The CatX HDMI receiver unit connects to any single cat5 CatX HDMI Transmitter or Repeater unit using low cost UTP cable. Full HD digital video and audio over cat6 UTP cable at 720p/1080i up to 65m or at 1080p up to 50m is possible with this unit.

This CatX HDMI receiver requires no manual setup. Distance adjustment and skew correction are automatic when the unit is powered up. This makes installation an easy and straight forward process.

More Details

The CatX HDMI Tx4 units broadcast a sharp, high quality video and audio signal up to 90m using low cost cat6 cabling. Cat5e cable will also give good results at distances up to 40m. The CatX HDMI Transmitter units can connect to any HDMI source using quality HDMI cables up to 20m from the transmitter.

The CatX HDMI transmitter unit connects to any single Cat6 CatX HDMI Receiver or CatX HDMI Repeater using low cost UTP networking cable. . Designed for commercial environments (24/7 reliability), CatX HDMI Tx will broadcast HD digital video and audio over cat6 UTP cable at 720p/1080i up to 65m or at 1080p up to 50m.This CatX HDMI transmitter unit also incorporate an EDID facility and is HDCP 1.1 compliant for use with Blu-Ray and Satellite video sources.

A Rack mount unit is also available for use with this product. Each 1U Rack mount unit can hold up to 3 x HDMI Tx4's.

More Details

CatX HDMI Repeater outputs a sharp high quality video and audio signal up to 90m, depending on the resolution. CatX HDMI Repeater units can be linked together via Cat6 cable in a daisy chain. This can extend a single HDMI source up to 300m. Designed for commercial environments (24/7 reliability and low power), CatX HDMI Repeaters will output HD digital video and audio over cat6 UTP cable at 720p/1080i up to 65m or at 1080p up to 50m. Display quality is maintained when multiple repeaters are linked together.

The CatX HDMI repeater unit can be connected to any HDMI output device using a quality HDMI cable up to 20m from the Repeater.

The CatX HDMI Repeater unit connects to any single CatX HDMI receiver or transmitter using low cost Cat6 cable.

More Details

The PT-571 and PT-572 are a twisted pair transmitter and receiver for HDMI signals. The PT-571 converts HDMI to a single twisted pair signal and the PT-572 converts the twisted pair signal back to HDMI.

Features

• Max. Data Rate - 1.65Gbps.
• HDTV Compatible.
• HDCP & HDMI 1.3a Compliant.
• System Range - Up to 90m (295ft) at 1080i/SXGA, or up to 30m (98ft) at 1080p/UXGA on shielded BC-DGKat524 cable; 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p/UXGA on shielded BC-DGKat623 cable.
• Cable - For optimum range and performance, use Kramer's BC-DGKat524 and BC-DGKat623. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5 and CAT 6 cables may not reach these ranges.
• Passes EDID (Extended Display Identification Data).
• Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached.
• Power Connect™ System - A single connection to the transmitter powers the receiver.
• Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.

The 631T and 631R are optical transmitter and receiver for HDMI signals up to 1600x1200 at 60Hz. The 631T converts a HDMI signal into an optical signal and the 631R converts the optical signal back to HDMI.

Features

• Max. Data Rate - 2.25Gbps.
• HDTV Compatible.
• HDCP 1.3 Compliant.
• System Range - Up to 100m (320ft).
• Power Connect™ System - Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other.
• Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5 and fiber optic with 4 simplex or 2 duplex LC fiber connectors.
• Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.

The 670T and 670R are a high performance fiber optic transmitter and receiver for HDMI signals. The 670T converts an HDMI signal to light pulses that are transmitted over one single fiber optic cable to the 670R receiver that converts them back to an HDMI signal.

Features

• Max. Data Rate - 3.4Gbps.
• HDCP Compatible.
• HDTV Compatible.
• Full Support for HDMI 1.3a.
• System Range - 1700m (5570ft)
• Cable - Multimode fiber optic 0M3 cable with SC connectors.
• Compact Pico TOOLS® - 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter.