A/V Wallplates

The Stereo Hi-Fi Wall Balun (500028-WP-UK) allows unbalanced line level stereo analogue audio to be transmitted via Category 5e/6 unshielded copper twisted pair (UTP) in a point- to-point connection. The product is designed for audio applications where full-range, hi-fidelity audio frequency response is required and is compatible with 86x86mm back boxes.

Used in pairs, the Stereo Hi-Fi Wall Balun eliminates costly and bulky coaxial cable, allowing audio equipment to be connected or moved within a structured cabling environment.

Features

• 20 Hz to 20 KHz bandwidth
• Up to 3,250 ft (1km) via Cat5e/6 UTP
• Quicker moves, adds and changes
• Compatible with 86x86mm back boxes
• Compatible with 50x50mm faceplate opening

Specification

The S-Video/Hi-Fi Wall Balun (500038-WP-UK) allows a single S-Video signal to be transmitted via unshielded twisted pair (UTP) cable up to 1000ft (305m) in a point-to-point connection. The S-Video/Hi-Fi Wall Balun features full audio bandwidth response for high fidelity applications and is compatible with 86x86mm back boxes for ease of installation. The S-Video/Hi-Fi Wall Balun works in pairs or in conjunction with the 500017 or 500038. Some of the applications are; classroom video distribution, commercial and home audio/video systems, hospital video training, video conferencing, and video kiosks.

Features

• Up to 1,000 feet (305m) via Cat5e/6 UTP
• 20 Hz to 20kHz audio bandwidth
• Compatible with 86x86mm back boxes
• Compatible with 50x50mm faceplate opening
• Lifetime warranty

Specification

The VGA Wall Balun II (500041-WP-UK, 500043- WP-UK) eliminates costly and bulky VGA cable, allowing a VGA source to be connected to a VGA monitor via one (1) Cat5e/6 cable. The VGA Wall Balun II allows VGA video to be transmitted up to 350ft (107m) via Cat5e/6 at 800 x 600 resolution. The 500043-WP-UK works with the 500041-WP-UK or in conjunction with the 500041 or 500042. The 500041-WP-UK works with the 500043-WP-UK or in conjunction with the 500040 or 500043 Typical applications include digital signage, boardroom systems, classroom video instruction and custom audio-video systems. The product features a "reset" button that may be required when used in conjunction with certain sync-sensitive displays.

Features

• Fully supports Cat5e/6 unshielded twisted pair (UTP)*
• Cost efficient versus VGA cable
• Compatible with 86x86mm back boxes
• Compatible with 50x50mm faceplate opening
• Save conduit space

*Reset button on units may be required with certain sync-sensitive displays. Not compatible with 500010, 500011 and 500014.

Specification

The Stereo AV/IR Pass-Thru Balun (500049-WP-UK) allows one (1) composite video, one (1) stereo audio and one (1) IR emitter signal to be transmitted via a single Cat5e/6 cable in a point-to-point connection. The Stereo AV/IR Pass-Thru Wall Balun features full audio bandwidth response for high fidelity applications and is compatible with 86x86mm back boxes The Stereo AV/IR Pass-Thru Balun works in pairs or in conjunction with the 500048 or 500049. Some of the applications are: classroom video distribution, commercial and home audio/video systems, hospital video training, video conferencing and video kiosks.

Features

• Video up to 2,200 feet (670m) via Cat5e/6
• Audio up to 3,250 feet (990m) via Cat5e/6
• 20 Hz to 20 kHz audio bandwidth
• IR 2-wire emitter pass-thru on fourth twisted pair
• Built-in colour-coded cable leads
• Compatible with 86x86mm back boxes
• Compatible with 50x50mm faceplate opening

Specification

The Component Video/Stereo Audio Wall Balun (500058-WP-UK) allows one component video (YPbPr or RGB) signal and one (1) Stereo Audio channel to be transmitted via one (1) Cat5e/6 twisted pair cable for more cost-efficient cabling. The product fits UK 86x86mm back boxes for neater wall mount installation. Used in pairs or in conjunction with the 500058, the Component Video/Stereo Audio Wall Balun supports high-definition resolution and true left/right stereo audio for hi-fidelity commercial and residential AV applications.

Benefits

• More cost-efficient cabling
• Quicker moves, adds and changes
• Neater wiring

Features

• Supports 720p/1080i/p up to 500ft (152m) via Cat5e/6
• Supports true Hi-Fi left/right analog stereo audio
• Ground Loop Coupling (GLC) (US Patent Pending)
• Compatible with 86x86mm back boxes
• Compatible with 50x50mm faceplate opening
• Modular shielded RJ45 connector

Not compatible with 500050/51/52/53/54/55/56/57/250/251/252/253

Specification

The Component Video/Analog Audio Wall Balun (5000-WP-UK) allows one component video (YPbPr or RGB) signal and one Analog Audio signal to be transmitted via one Category 5e/6 twisted pair cable for more cost-efficient cabling. Used in pairs, or in conjunction with the 500052/500053, the Component Video/Analog Audio Balun supports 480i/p, 720p and 1080i/p video formats for commercial and residential hi-definition (HDTV) video applications.

Benefits

• More cost-efficient cabling
• Quicker moves, adds and changes
• Neater wiring.

Features

• Supports 480i/p/1080i/p up to 1000ft (305m) via Cat5e/6
• Supports 720p/1080i/p up to 500ft (152m) via Cat5e/6
• Moulded colour-coded RCA cable leads
• Supports analog audio on fourth twisted pair
• Compatible with 86x86mm back boxes
• Compatible with 50x50mm faceplate opening

Specification

The HDMI Econo Plus Extender Kit (500401-WPUK) allows HDMI equipment to be connected up to 150 ft (45m) via two (2) Cat5e unshielded twisted pair cables in a point-topoint configuration at 1080p resolution. The product also supports 1080p Deep Color up to 90 ft (27m) via Cat6 cables. The kit comes with one (1) transmitter, one (1) receiver and one (1) power supply.

Applications

Commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, medical information systems.

Features

• Up to 150 ft (45m) @ 1080p via Cat5e
• Up to 90 ft (27m) @ 1080p Deep Color via Cat6
• Connect via two (2) Cat5e/6 cables
• May be used with MuxLab mounting accessories
• Compatible with 86x86mm back boxes
• Compatible with 50x50mm faceplate opening

Specification

The SV-301xl is a wall plate for computer graphics video & stereo audio signals. The unit is part of the SummitViewTM media room solution and converts the signals to a twisted pair signal to connect to the SV-551/SV-552 BrainBoxTM processor/controller.

Features

• Front Connections - 15-pin HD & stereo 3.5mm.
• Rear Connections - RJ-45 on US version, easy-insert CAT 5 terminal on EU version.
• Enhanced EDID (Extended Display Identification Data) - The unit can store an EDID for its input in non-volatile memory as well as having a default EDID if one is not stored. This allows a convenient and reliable connection to the source.
• Power Connect SystemTM - Power to the unit is provided from the SV-551/SV552 via the CAT 5 cable.
• Wall Plate Size - 1 Gang EU.
• Available in white
• Works with TP-122

The RC-8iR is an 8-button room controller for multimedia rooms. It will control audio components, video components and other room facilities such as lights and screens.

Features

• Configurable Back-Lit Buttons - Functions and/or macros are programmed into the 8 buttons which can be labelled for easy operation.
• Command Programming - IR learning or Ethernet.
• Control Options -1 Ethernet, 2 RS-232, 4 2x2 IR Emitters, 1 RS-485 & 2 Relays.
• Macro Mode - up 15 commands with a single button, maximum 120 commands.
• Wall Plate - 1 Gang.

A wall plate that has on the front XGA, HD-15, CV RCA connectors. On the back it has terminal block connectors.

Features

• Front Panel Connections - RCA Female and 15-pin HD Female.
• Rear Panel Connections - Dual 6-pole terminal block.
• Wall Plate Size - Single Gang.

A wall plate that has on the front an XGA, HD-15 and a 3.5mm stereo audio connector. On the back it has terminal block connectors.

Features

• Front Panel Connections - 15-pin HD Female and 3.5mm Female.
• Rear Panel Connections - Dual 6-pole terminal block.
• Wall Plate Size - Single Gang.

A wall plate that has on the front three video inputs, YUV, Composite, YC, RGB, on RCAs and a 3.5mm stereo audio socket. On the back it has terminal block connectors.

Features

• Front Panel Connections -3 RCA Female and 1 3.5mm Female.
• Rear Panel Connections - 3-pole and a 6-pole terminal block.
• Wall Plate Size - Single Gang.

The WP-211DS is a 2-input automatice Switcher for XGA and stereo Audio signals. It switches to the secondary input upon loss of the primary input or it can be switched via contact closure. Dual video outputs are in RGBHV and Twisted Pair CAT 5 formats on terminal block connectors.