· Composite video via twisted pair
· BNC to RJ45
· Security and Surveillance

· Pan,Tilt, Zoom Balun for "up-the-coax" CCTV systems
· Security and surveillance.

· Composite video via twisted pair
· BNC to screw terminals
· Fits side-by-side on DVRs and muxes
· Security and Surveillance

· Composite video to twisted pair up to 1700m
· Requires floating 24VAC (not supplied)
· Security and Surveillance
· Auto-gain control - No need for manual adjustment
Also available, LONGREACH™ active 16 port hub - call our sales office

· Combines CCTV video, remote power and PTZ control over one 4-pair Cat5 cable with RJ45 terminal.

· Converts CCTV video to twisted pair
· Fits inside CCTV dome cameras and CCTV camera back boxes.

· Combines CCTV video and remote power over one 4-pair Cat5 cable with RJ45 terminal.

· Low power consumption - less than 0.7W
· Derives power from camera power supply
· Gain compensation based on cable length
· Suitable for 12V DC cameras (For 24VAC cameras use M500101 - call sales)
· Ground loop isolation
· Fits inside CCTV dome cameras and back boxes
· Works with other Muxlab CCTV baluns
· Cable strain relief

· Combines 4 composite video channels over one Cat5 cable
· Allows up to 4 CCTV cameras to be connected via 1 Cat5 cable
· Features four BNC connectors and 1 RJ45.

· Allows up to 16 cameras to be connected via Cat5
· Allows video, power and PTZ control to be managed via one Cat5 cable
· Works in conjunction with MuxLab p/ns 500009, 500022, 500023, 500024, 500029 for a complete CCTV cabling solution
· Features built-in balun on video portion.

· Composite video and stereo audio via twisted pair
· Presentation systems, custom home installations.

· VGA via twisted pair
· Works with 500011 or 500014 as transmit/receive pair
· Shielded twisted pair recommended
· Presentation, classroom, corporate projection systems.

· VGA via twisted pair
· Works with 500010 as transmit/receive pair
· Shielded twisted pair recommended
· Presentation, classroom, corporate projection systems.

· VGA via twisted pair
· Works with 500010 as transmit/receive pair
· Shielded twisted pair recommended
· Presentation, classroom, corporate projection systems.

· Composite or S-Video and stereo audio via twisted pair
· Audio-video systems
· Custom home installations.

· S-Video via twisted pair
· 4-pin mini DIN to RJ45
· Presentation, classroom, corporate projection systems
· Custom home installations.

· S-Video and stereo audio via twisted pair
· 4-pin mini DIN to RJ45
· Presentation, classroom, corporate projection systems
· Custom home installations.

· Line-level audio via twisted pair
· One pair required per audio channel
· Custom home installations.

· Dolby Digital or dts digital audio via twisted pair up to 600 ft.
· Custom home installations.

· Allows a standard AES Analog or Digital Audio channel to be connected via Cat 5
· With heavy-duty strain relief.

· Allows a standard AES Analogue or Digital Audio channel to be connected via Cat5
· With heavy-duty strain relief

· Supports stereo audio over Cat5
· 60Hz to 20KhZ bandwidth
· RCA to RJ45.

· Supports hi-fidelity stereo audio over Cat5
· 20Hz to 20kHz bandwidth
· RCA to RJ45.

· Combines 4 composite video channels over one Cat5 cable
· Features 4 RCA connectors and 1 RJ45

· Combines 4 analog audio channels over one Cat5 cable
· Features 4 RCA connectors and 1 RJ45.

· Allows a VGA source to be connected to a VGA display via Cat5 unshielded twisted pair cable
· Includes 1 transmitter and 1 receiver
· Local monitor port
· Gain adjustment
· Supports up to 120m @ 1800 x 1440 resolution.

· Up to 325m via Cat5
· 20Hz to 20kHz audio bandwidth
· Compact design for more efficient wiring

· Up to 670m via Cat5
· 20Hz to 20kHz audio bandwidth
· Built in colour coded cable leads
· Compact design for more efficient wiring

· Allows 1 PS/2 keyboard and mouse to be connected via Cat5 cable.
· Supports up to 105m

· Composite and S-Video distribution via twisted pair
· Up to two video and two audio to eight locations
· Presentation, classroom, corporate projection systems
· Custom home installations

These Passive VGA Baluns are UTP Baluns with a RESET BUTTON needed for sync sensitive displays. They also feature a LOCAL GROUND TERMINAL for installations where background noise may be an issue.
· Fully supports Cat5 UTP
· Cost effective versus VGA Cable
· Use existing structured cabling systems
· Saves conduit space
* Reset switch on units may be required with certain sync-sensitive displays
· NOT compatible with 500010, 500011 or 500014

The VideoEase HDMI Econo Extender Kit (500400) allows HDMI equipment to be connected up to 200 ft (60m) via two (2) Cat5e unshielded twisted pair cables in a point-to-point configuration at 1080i resolution. The kit come with one (1) transmitter and one (1) receiver. Suitable for use with commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, medical information systems.
Key Features
· Supports up to 1080p Up to 200 ft (60m) @ 1080i
· Connect via two (2) Cat5e cables
· Compact design

The VideoEase Component Video/Digital Audio Baluns allow one component video, YPbPr or RGB, signal and one Digital Audio signal to be transmitted via one Cat5 twisted pair cable for more cost-efficient cabling. Used in pairs, the Component Video/Digital Audio Balun supports 480i/p, 720p and 1080i/p video formats for hi-definition, HDTV video applications
· Supports 480i/p, 720p, 1080i/p
· Supports 480i/p up to 305m via Cat5
· Supports 720/1080 up to 152m via Cat5
· Moulded colour coded RCA Leads and Connectors
· Supports digital audio on fourth twisted pair
· Moulded shielded RJ45 connector

The VideoEase Component Video/Analog Audio Baluns allow one component video, YPbPr or RGB, signal and one Analog Audio signal to be transmitted via one Cat5 twisted pair cable for more cost-efficient cabling. Used in pairs, the Component Video/Analog Audio Balun supports 480i/p, 720p and 1080i/p video formats for commercial and residential hi-definition, HDTV video applications
· Supports 480i/p, 720p, 1080i/p
· Supports 480i/p up to 305m via Cat5
· Supports 720/1080 up to 152m via Cat5
· Moulded colour coded RCA Leads and Connectors
· Supports analog audio on fourth twisted pair
· Moulded shielded RJ45 connector

The Muxlab Component Video Hub allows 1 full component video source and 1 digital audio video source to be distributed to up to 8 or 16 destinations for most cost effective cabling. Works in conjunction with 500050 and other MuxLab baluns that support component video digital audio.
· Modular RJ45 on input
· Cascadable up to 2 levels
· Supports 480i/p up to 305m via Cat5
· Supports 720p/01080i/p up to 152m via Cat5
· Supports digital audio on fourth twisted pair
· Ground Loop isolation on every port

Applications
Digital signage, boardroom systems, multi-rrom systems, classroom training, retail systems, electronic bill boards, electronic signage, video kiosks, point-of-sale displays, in-store video.

The VideoEase CATV Hub allows a terrestrial broadband RF video signal to be distributed to multiple RF receivers via Cat5 unshielded twisted pair cable. The CATV Hub is available in two configurations; Eight ports 500301 and sixteen ports 500304. The CATV Hub works in conjunction with MuxLab's passive CATV Baluns and other RF video equipment for a more complete cabling solution. The CATV Hub has a 900 MHz bandwidth and supports broadband video and internet. The product features built-in gain amplification and port buffering and may be used in conjunction with standard RF distribution equipment for larger installations.
· Supports up to 900 MHz, CATV channel 142
· Low insertion loss
· Supports broadband internet and digital cable
· Eliminate costly coaxial cable
· Compact design
· Quicker moves, adds and changes
· Neater Wiring

· Cost saving - eliminate costly coaxial cable
· Less down time - quicker moves, adds and changes
· More efficient wiring
· 900 MHz bandwidth
· low return loss eliminates ghosting
· Compact design
· Lifetime warranty

· Supports PAL, SECAM, NTSC
· Supports Cscart, Peritel, Euroconnector
· Composite video up to 670m via Cat5
· S-video up to 305m via Cat5
· More cost-efficient wiring

The Rackmount Balun Chassis 16 is designed as a head-end cable management solution to allow any combination of MuxLab square baluns to be installed in a 19� relay rack. Head-end AV equipment such as DVD players, video servers and sat boxes may be installed in a local wiring closet and connected to the Cat5 structured cabling system via a wide array of MuxLab balun solutions. The panel is custom-tailored to allow any combination of up to sixteen MuxLab baluns to be installed. The baluns may be installed with the RJ45 either front or rear facing depending on where the Cat5 cabling will enter or exit the system. At the display end, the appropriate MuxLab baluns are installed at the display to support a fully Cat5 cabling solution. Each balun snaps into place and is held firmly by a spring latching mechanism. The one-piece design makes the product easy to install and maintain. There are no parts to lose or replace.
· Space efficient - 2U height
· One-piece design
· Latching mechanism for secure installation
· Supports up to sixteen baluns
· Snap-in design for ease of installation
· Baluns install forward or rear-facing
· Includes four rackmount screws and washers
· Slot number silkscreen on front