Audio & Video Distribution Amplifiers

Show only parts from :

Video Launch and Distribution Amplifier
Addlestone Logo

Dual purpose product which can be utilised as either a Launch Amplifier or Distribution Amplifier for unbalanced coaxial cable. Use as a Launch Amplifier when installed at the camera end to enhance picture quality over longer transmission distances or as a Distribution Amplifier when used at the monitor end of the cable run where it will function as a Video Distribution Amplifier using the two coax outputs.

Features

  • Fully RoHS compliant
  • Tool-less adjustable controls
  • Designed and manufactured in the UK
  • UK based technical support
  • Gain control adjustable from -2.0dB to +6.0dB
  • High Frequency Lift Control adjustable from 0dB to +6dB @4.4MHz
  • Transorbs fitted as standard for surge protection, gas tubes available as an optional extra for harsh environments
  • 230V Plug-top 12V DC power supply nominal 300 mW power consumption connected via spring loaded screw less terminal block
  • Input requirement nominal 1.0V Pk-Pk @ 75Ω composite video signal. Suitable for either colour or monochrome video.
  • Output signal nominal 1.0V Pk-Pk @ 75Ω, unit set to Unity Gain
  • Differential Phase <3°. Differential Gain <3%
  • Distance of 1000 metres when used with good quality RG59 or CT125 and in conjunction with an A.E. Line Corrector AEBH187
Video Launch and Distribution Amplifier

AEBH184

£57.00

add  to basketadd to basket
Video Launch Amplifier & Active Balun for Twisted Pair
Addlestone Logo

Video Launch Amplifier and active Balun for conversion of unbalanced coax video signal to balanced twisted pair signal. Use as a Launch Amplifier to enhance picture quality over longer transmission distances.

Features

  • Fully RoHS compliant.
  • Tool-less adjustable controls.
  • Designed and manufactured in the UK.
  • UK based technical support.
  • Gain control adjustable from -2.0dB to +6.0dB.
  • High Frequency Lift Control adjustable from 0dB to +12.0dB @ 4.4MHz.
  • Balance Control for amplitude of + and - video output signal.
  • Transorbs fitted as standard for surge protection, gas tubes available as an optional extra for harsh environments.
  • 230V Plug-top 12V DC power supply 300 mW power consumption connected via spring loaded screw less terminal block.
  • Input requirement nominal 1.0V Pk-Pk @ 75Ω composite video signal. Suitable for either colour or monochrome video.
  • Output signal nominal 2.0V Pk-Pk @ 1000, unit set to Unity Gain.
  • Differential Phase <3°. Differential Gain <3%.
  • Distance of 1000 metres when used with Cat5/6 UTP cable and in conjunction with an A.E. Line Corrector AEBH188
Video Launch Amplifier & Active Balun for Twisted Pair

AEBH185

£61.57

add  to basketadd to basket
Video Distribution Amplifier 1-In 4-Out
Addlestone Logo

The AEBH207 is a single channel Video Distribution Amplifier that will split a video signal into four identical outputs with no loss of signal strength or signal quality.

Features

  • Fully RoHS compliant
  • Tool-less adjustable controls
  • Designed and manufactured in the U K
  • UK based technical support
  • Gain control adjustable from -2.0dB to +6.0dB
  • High Frequency Lift Control adjustable from OdB to +6.0dB @ 4.4MHz.
  • Transorbs fitted as standard for surge protection, gas tubes available as an
  • optional extra for harsh environments.
  • 230V Plug-top 12V DC power supply nominal 300 mW power consumption
  • connected via spring loaded screw less terminal block.
  • Input requirement of nominal 1.0V Pk-Pk @ 75Ω composite video signal.
  • Suitable for either colour or monochrome video.
  • Output signal nominal 1.0V Pk-Pk @ 75Ω, unit set to U nity Gain.
  • Differential Phase <3º. Differential Gain <3%.
  • Distance of 300 metres when used with good quality RG59 or CT125.
Video Distribution Amplifier 1-In 4-Out

AEBH207

£60.03

add  to basketadd to basket
Video Distribution Amplifier 1-In 2-Out
Addlestone Logo

The AEBH209 is a single channel Video Distribution Amplifier that when used on its own will split a video signal into two identical outputs with no loss of signal strength or signal quality. When used with one AEBH208 up to seven outputs can be achieved and with two AEBH208 can give up to twelve outputs.

Features

  • Fully RoHS compliant.
  • Tool-less adjustable controls.
  • Designed and manufactured in the U K.
  • UK based technical support.
  • Gain control adjustable from -2.0dB to +6.0dB.
  • High Frequency Lift Control adjustable from 0dB to +6.0dB @ 4.4MHz.
  • Transorbs fitted as standard for surge protection, gas tubes available as an optional extra for harsh environments.
  • 230V Plug-top 12V DC power supply nominal 300 mW power consumption connected via spring loaded screw less terminal block.
  • Input requirement nominal 1.0V Pk-Pk @ 75Ω composite video signal. Suitable for either colour or monochrome video.
  • Output signal nominal 1.0V Pk-Pk @ 75Ω unit set to U nity Gain.
  • Differential Phase <3º. Differential Gain <3%.
  • Maximum of 12 outputs when used with two AEBH208 units.
  • Distance of 300 metres when used with a good quality RG59 or CT125.
Video Distribution Amplifier 1-In 2-Out

AEBH209

£60.03

add  to basketadd to basket
Video Distribution Expander Unit
Addlestone Logo

The AEBH208 is a passive expander unit that increases the number of output video signals on the AEBH209; each unit accepts one expander input from the AEBH209 and gives five extra video outputs with no loss of signal strength or signal quality. The BH208 cannot be used independently, as it requires a AEBH209 as the video driver.

Features

  • Fully RoHS compliant
  • Designed and manufactured in the U K
  • UK based technical support
  • Input required from Expander BNC socket on BH209.
  • Output signal nominal 1.0V Pk- Pk @ 75Ω.
Video Distribution Expander Unit

AEBH208

£41.00

add  to basketadd to basket