Video Distribution Amplifier Racking System

The AEBH220 is ordered unpopulated with 16 slots available and then assembled in the factory with modules as per the customer's requirement. The versatile design enables a choice appropriate to the installation and also offers the potential to reserve space for future capacity. Depending on the configuration, the unit will accept a maximum of 32 inputs. The rack is supplied with an in line switch mode power supply and extender card to assist the installer with any required adjustments.

Features

• Fully RoHS compliant.
• Adjustable controls.
• Designed and manufactured in the U K.
• UK based technical support.
• Versatile Design, allowing the possibility for a 1 in 2 out, 1 in 4 out and 1 in 5 out all in the same 3u rack.
• Gain control adjustable from -2.0dB to +6.0dB.
• High Frequency Lift Control adjustable from 0dB to + 6.0dB @ 4.4MHz.
• Transorbs fitted as standard for surge protection, gas tubes available as an optional extra for harsh environments.
• Power supply 12V DC @ 1.5A, Input 100VAC - 240VAC - Nominally 100W 47-63Hz via IEC Connector.
• Input requirement nominal 1.0V Pk-Pk @ 75Ω composite video signal. Suitable for either colour or monochrome video.
• Output signal nominal 1.0V Pk-Pk @ 75Ω (unit set to U nity Gain).
• Differential Phase <3º. Differential Gain <3%.
• Distance of 300 metres when used with a good quality RG59 or CT125.

2-in 4-out module with Video Distribution Amplifier, uses 1 slot, max 32 cameras per rack

2-in 10-out module with Video Distribution Amplifier, uses 2 slots, max 16 cameras per rack

High Density 2-in 8-out module with Video Distribution Amplifier, uses 1 slot, max 32 cameras per rack

Max 16 per rack